| Brand | POWERTECH |
| Model NO. | ZSG Series rectifier transformer |
| Rated capacity | 125kVA |
| Primary voltage | 10.5kV |
| Secondary voltage | DC220V |
| Series | ZSG Series |
Overview
1. To effectively reduce harmonics injected into the grid from the load side and improve power quality, our company provides multi-pulse phase-shifting rectifier transformers. We can customize single-unit 12-pulse, 24-pulse, 36-pulse, dual-unit 24-pulse, and o ther combinations of phase-shifting rectifier transformers according to requirements.
2. The main characteristic of rectifier transformers is the presence of unidirectional pulsating current in the windings, with the sec ondary current being a non-sinusoidal AC waveform. Our company's rectifier transformers use ANSYS simulation technology for multi-physics field coupling simulation, optimizing winding electromagnetic wire specifications and cooling air ducts, effectively reducing eddy current losses caused by harmonic currents of various frequencies, lowering product operating temperature, and enhancing product overload capacity.
3. The transformer core uses high-quality cold-rolled silicon steel sheets from Baowu Group, cut and stacked using a seven-step 45° fully mitered joint process. No-load losses, no-load current, and operating noise are all superior to national and industry standards, effectively reducing product weight, dimensions, and greatly reducing transformer inrush current during closing.
4. The transformer enclosure is made of 2.0mm cold-rolled steel plate, with high-temperature silicone rubber strips sealing between the frame and movable panels, meeting protection class requirements while effectively reducing vibration noise. The enclosure meets C5M anticorrosion standards, with corrosion resistance, weather resistance, and UV resistance. The coating is crack-resistant and wear-resistant.
5. The transformers can adapt to large instantaneous loads and precisely match subsequent rectification elements and filtering devices to ensure output current stability and efficiency.
6. The transformer can be equipped with intelligent components to monitor its operating status in real-time, including real-time power transmission, operating voltage and current, operating temperature, insulation performance monitoring, etc. When any performance parameter is abnormal, it can output a switch alarm signal. It has a "black box" function, allowing all operating parameters to be viewed in
real-time on the cloud.
Environmental Conditions for Used
Altitude: ≤ 2000m (products for altitudes above 2000m can be customized)
Ambient temperature: -40℃ ~+55℃
Relative humidity: ≤ 95%
Applications:
Rectifier transformers are indispensable components in power electronic systems, acting as bridges connecting AC and DC power forms. With the rapid development of industry and transportation, the demand for rectification equipment is growing. Meanwhile, the large amount of harmonics generated by rectification systems severely pollutes the power grid. Multi-pulse phase-shifting rectifier transformers are widely used in high-power industries and places with requirements on grid-side harmonic currents, such as chemical, metallurgy, coal, cement, rolling mills (steel plants), and rail transit. Rectifier transformers with bidirectional transmission function are also widely used in ne w energy fields like energy storage.
If you need to know about more parameters, Please check the model selection manual.↓↓↓
Or you are welcome to contact us.↓↓↓
-
Ultimate Guide to AC Contactor Abnormal Noise: From Electromagnetic Noise to Mechanical Vibration, Accurate Diagnosis and HandlingIn electrical control systems, AC contactors are among the commonly used electrical components, and they are also a common source of various electrical faults. After long-term use—especially in harsh environments with high levels of dust—AC contactors may sometimes emit squeaking or rattling noises after being pulled in and held. The causes of this phenomenon are analyzed as follows.Squeaking Noise After Pull-In and HoldingA fully functional AC contactor makes no noise when energized and pulledFelix Spark09/11/2025 -
Mismatched AC Contactor Sizing? These 4 Typical Issues You Must Not Ignore – Click to View SolutionsAC contactors (with the electrical schematic code KM) are core electrical devices used to control the connection/disconnection between power supplies and loads in circuits, and they are also common equipment that electricians need to work with regularly. In practice, it is not uncommon to find that some peers make mistakes in selecting AC contactors, leading to improper sizing and subsequent persistent issues. Here, four of the most typical common mistakes are highlighted for reference.I. Over-RJames09/11/2025 -
Comprehensive Guide to High-Frequency Fault Handling of AC Contactors: 90% of Problems Solved with One Method1. Fault Phenomena, Cause Analysis and Handling MethodsContactor does not operate or operates abnormally after coil energization Open circuit in coil control circuit; Check if there is wire breakage or loosening at the terminal blocks. If there is a wire breakage, replace the corresponding wire; if there is loosening, fasten the corresponding terminal block. Coil damage; Measure the coil resistance with a multimeter. If the resistance is ∞, replace the coil. Thermal relay not reset after operatiFelix Spark09/11/2025 -
Proper Installation of AC Contactors | A Practical Guide to Avoid Burning and Misoperation, Master It in One ArticleAC contactors are widely used for switching and controlling power circuits. They use main contacts to open and close circuits, and auxiliary contacts to execute control commands. Main contacts typically only have normally open contacts, while auxiliary contacts often have two pairs of contacts with normally open and normally closed functions. Small-sized contactors are also frequently used as intermediate relays to work with main circuits, thereby achieving the function of remote control or contJames09/11/2025 -
Application and Maintenance of AC Contactors | Comprehensive Analysis of Common Fault Handling, Master It in One Article1 Analysis of Key Components of AC ContactorsAn AC contactor is an automated electromagnetic switch used for long-term, high-frequency switching of AC main circuits and control circuits. It features advantages such as automatic operation, under-voltage and no-voltage protection, high-capacity operation, strong stability, and low maintenance requirements. In the electrical control circuits of machine tools, AC contactors are mainly used to control electric motors and other loads.The key componentFelix Spark09/11/2025 -
Why Do Contactors Always Burn Out? Overload and Short-Circuit Protection Must Be Implemented SimultaneouslyContactors are used to close and open loads that require such operations during normal use, particularly for specific activities like medium-voltage public lighting and industrial electric motors.The medium-voltage contactor + fuse combination controller (F-C) can control motors up to 12 kV. However, medium-voltage controllers are also suitable as feeders for other types of loads, especially transformers. For such loads, contactors are usually modified to include mechanical latching, so that theEcho09/11/2025
-
Core Value and Innovative Applications of 12kV Medium Voltage Switchgear in Smart SubstationsWith the Rapid Development of Smart Grids and the Integration of Renewable Energy Medium Voltage (MV) Switchgear, as the core power distribution equipment in substations, directly determines the stability of the power system through its reliability, intelligence, and space efficiency. This article delves into the key technologies, scenario-specific solutions, and practical benefits of Medium Voltage Switchgear in substations.Core Requirements for Substation ScenariosHigh Reliability RequirementsPOWERTECH06/12/2025 -
Withdrawable 12kV Medium Voltage Switchgear: The Indispensable Pivot of Flexibility and Safety in Smart GridsAt the core of medium-voltage power distribution systems in industrial facilities, commercial complexes, and data centers, switchgear acts as a silent commander, governing the lifeline of electrical flow. Among various solutions, Withdrawable Switchgearhas become synonymous with reliability in modern MV systems due to its unique design philosophy. Compared to fixed switchgear, its "withdrawable" feature delivers compelling advantages, setting new benchmarks for operational efficiencyand perPOWERTECH06/12/2025 -
Core Dilemma in Southeast Asia 12kV Medium Voltage SwitchgearSoutheast Asia’s rapidly growing power demand (GDP growth >5% annually) combined with extreme climatic conditions—high temperature, humidity, and salt spray corrosion—necessitates balancing lifecycle costs with climate resilience in switchgear selection. This article analyzes the optimal cost-performance solutions between GIS and AIS.I. GIS vs. AIS Cost Comparison Model (Southeast Asia Context)1. Initial Investment Costs2. Long-Term Operational CostsGIS Advantages:ExtPOWERTECH06/12/2025
